Tips for the Mold Remediation Process

7/15/2021 (Permalink)

Mold containment in a Wyncote, PA property.

Mold Remediation Process 

Mold is everywhere. It is naturally a part of the environment, and this includes the indoor air space of your commercial property in Wyncote, PA, as well as the outdoor area surrounding it. It doesn't become a problem until excess moisture in the building leads to mold growth on surfaces. If you see black mold or notice a musty smell, it may be time to call mold remediation experts to start the process of containing and eliminating the mold.

Containment

The first thing the specialists are going to do is try to contain the problem. After donning the appropriate protective gear, they may start to block off the affected area. If you are anywhere near the area, you need to wear the appropriate gear too:

• Goggles
  
• Coveralls
  
• Face mask with respirator
  
• Gloves
  
• Protective footwear
  
  

To limit the spread of black mold, it is a good idea to block off HVAC intake from affected areas. This can minimize the amount of mold that is spread throughout your vents and thus throughout the building.

Removal

During mold cleanup, it may be necessary to tear out walls where the mold has put down roots. It is often not enough to clean the surface of a wall or other porous structures, because mold does not just grow on the surface. It gets down in all the tiny cracks and pockets once it starts to grow, and it can do so rapidly. Remediation experts may have to remove and replace walls and insulation in order to resolve the issue.

Dehumidification

To avoid a return of the mold growth, it is a good idea to dehumidify the whole building, particularly the area where the mold was growing to begin with. Mold must have a moist environment to thrive. If you deny it moisture, you can prevent future mold problems.

If you need mold remediation, trust the experts. Their knowledge and skill can help you rid your building of black mold growth and keep it from returning. You can help by calling as soon as you suspect there is a problem and by keeping the humidity level low in the building.