How To Stop a Continuously Flushing Toilet

8/21/2020 (Permalink)

A malfunctioning flushometer may also continuously flush, driving up the cost of your water bill

While flushometers usually work quite well, a toilet overflow can still occur. A malfunctioning flushometer may also continuously flush, driving up the cost of your water bill.
You may not need to call a plumber to deal with this issue. As long as you have some handyman skills, you can stop a constantly flushing toilet on your own.

Stopping a Toilet With a Manual Flushometer

You only need some basic tools to fix a manual flushometer. Start by grabbing the following:

• Flat screwdriver
  
• Wrench
  
• Cleaning products
  
  

There should be a slot on the side of the flushometer. Put the screwdriver in there and turn the tool to shut off the water. This way, you will not have to deal with a toilet overflow while you fix the flushometer.
Next, use a wrench to screw off the flushometer's top lid. You can then remove the flange cover to reveal a gasket. Take the gasket out of the flushometer and wash out the sediment. Be sure to clean the weep hole, as well.
Finally, put the gasket back into the flushometer and restore the flange cover and lid. Do not forget to turn back on the water before trying to use the toilet.

Stopping a Toilet With an Automatic Flushometer
If your flushometer flushes automatically, try holding down the chrome button after you turn off the water. If you hear clicks within two seconds of each other, you need to remove the top of the flushometer and clean the diaphragm kit. You may also want to make sure the solenoid is properly tightened.
The above steps should help you stop a toilet that keeps flushing. Yet your toilet may still develop problems even after you fix the flushometer. For instance, a clog could cause a toilet overflow. If this happens to your property, you should not attempt to clean up the toilet flood on your own. Instead, you should utilize emergency restoration professionals in Plymouth Meeting, PA.